Industrial Control Products

Self-adhesive marking strips on a DIN A4 sheet, marked with numbers 51-60, 6mm wide and 182mm long.

WAGO 250-1411 PCB terminal block for secure electrical connections. 11 poles, 0.5 mm² wire size, push-in CAGE CLAMP®.

2-conductor disconnect/test terminal block with receptacle for adjacent jumper and switch lever, compatible with 4 mm Ø test plugs.

Self-adhesive marking strips by WAGO, white, 6mm x 182mm, for horizontal marking.

Insulated ferrule for 10 mm² / AWG 8 wire, electro-tin plated, and gastight crimped. Meets DIN 46228 standards.

Self-adhesive marking strips in DIN A4 sheets, marked 81-90 (120x), 6mm wide, 182mm long. Ideal for electrical component labeling.

Self-adhesive marking strips by WAGO, 80 markers (17-32), horizontal marking, DIN A4 sheet.

Self-adhesive marking strips for horizontal marking, numbers 21-30, 6mm x 182mm, compatible with 4-conductor terminal strips.

WAGO 745-3153 PCB terminal block, 4 mm², 3-pole, CAGE CLAMP, 7.5 mm pin spacing, gray.

The WAGO 283-350 is an end and intermediate plate designed for use with rail-mounted terminal blocks. It is 2.5 mm thick and gray in color.

Stackable PCB terminal block with CAGE CLAMP® technology, suitable for conductor cross sections from 0.08 mm² to 2.5 mm².

Angled 15-pole THT female header with 5 mm pin spacing, made from copper alloy and polyamide housing.

THR PCB terminal block with push-button, 1.5 mm² wire size, 3.5 mm pin spacing, and 6 poles. Ideal for PCB connections.

6-position terminal block header with male pins, shrouded design, and vertical through-hole mounting.

The WAGO 770-318 is a 3-pole snap-in frame designed for the WINSTA series, compatible with wire sizes from 1.0 to 3.0 mm.

Angled 1-conductor female connector with CAGE CLAMP, 2.5 mm², 5 mm pin spacing, and 100% mismating protection.

WAGO 2001-1208 is a 2-conductor shield terminal block with 1.5 mm² cross-section, suitable for DIN-rail mounting.

3-conductor through terminal block for DIN-rail mounting, suitable for Ex e II applications with 2.5 mm² cross-sectional area.

The WAGO 740-105 is a 5-pole PCB terminal block with 2.5 mm² cross-section and 5 mm pin spacing, featuring CAGE CLAMP® technology.

End and intermediate plate for rail mount terminal blocks, 2 mm thick, gray.