Industrial Control Products

Compact 7-pole PCB terminal block for reliable connections.

6-pole strain relief housing for 2 cables, suitable for 8.5 - 13.5 mm diameter cables.

Self-adhesive marking strips for labeling, 1-48 markings, horizontal, halogen-free, ROHS compliant.

A 12-position, 3.5mm pluggable terminal block with cage clamp connection for 28-14 AWG wires.

3-conductor terminal block for PNP high-side actuators with red LED, push-in spring termination, and 12-28 AWG wire range.

4-conductor chassis-mount terminal strip with ground contact, N-PE-L1-L2, and push-in CAGE CLAMP® connection technology.

37-pole interface module with female connector, solder pin, and vertical mounting. Features triple-deck PCB terminal blocks.

Self-adhesive marking strips for 2.54 mm terminal blocks. EN 60998-1:2004 compliant. DIN A4 sheet, 400 strips.

The WAGO 289-151 is a component module with a diode, designed for reliable electrical connections and compliant with ROHS standards.

4-conductor chassis-mount terminal strip with push-in termination for solid, stranded, and fine-stranded conductors.

The WAGO 289-556 is an interface module featuring a female connector, 15 poles, and solder pins. It is designed for vertical mounting and uses double-row PCB terminal blocks.

The WAGO 289-548 is a 37-pole interface module with a male connector, designed for vertical mounting on PCBs. It features solder pins and double-row terminal blocks.

Self-adhesive marking strips for easy identification of terminal blocks. Available in DIN A4 sheets with 1-32 markers, each 3 mm high and 182 mm long.

Self-adhesive marking strips for horizontal marking. DIN A4 sheet with 33-48 markers, 3 mm height, 182 mm length.

WAGO 733-334 THT male header, 4-pole, 2.5mm pin spacing, 0.8x0.8mm solder pins, 100% mismating protection.

1-conductor male connector with CAGE CLAMP, 2.5 mm², 5 mm pin spacing, 5-pole, and 100% protected against mismating.

Self-adhesive marking strips for easy identification on 3.96mm pitch terminal blocks. Labeled with numbers 1 through 16.

3-pole PCB terminal block with 4 mm² wire cross section, 12.5 mm pin spacing, and CAGE CLAMP® technology.

PCB terminal block with 5 poles, CAGE CLAMP technology, and screwdriver actuation. Rated for 500V and 32A.

The WAGO 289-554 is an interface module with a solder pin, featuring a 50-pole female connector and double-row PCB terminal blocks.