Industrial Control Products

8-channel digital output module, 24VDC, 0.5A per channel, low-side switching, suitable for extreme environments.

Intelligent 1-channel DC drive controller for 24VDC motors up to 5A with incremental position feedback and short-circuit protection.

Wago 2002-424/000-006 continuous jumper for reliable electrical connections, rated 25A and 800V.

WAGO 858-308 relay module with 4 changeover contacts, 220 VDC, 5A continuous current, and Push-in CAGE CLAMP connections.

WAGO 231-439/001-000 THT male header, 9-pole, angled, 5mm pin spacing. Reliable PCB connections.

WAGO 753-467: 2-channel analog input module, 0-10 VDC, single-ended, 12-bit, DIN-35 rail mount.

2-conductor female connector; Push-in CAGE CLAMP; 2.5 mm²; Pin spacing 5.08 mm; 4-pole; with integrated end plate; orange.

3-position PCB terminal block with 2.5 mm pitch, CAGE CLAMP® connection, and AWG 28-20 wire compatibility.

Reliable 1-conductor female connector with Push-in CAGE CLAMP® for 4 mm² conductors, 5.2 mm pin spacing.

2-conductor/2-pin double-deck terminal block with CAGE CLAMP®, internal commoning, and violet wire entry for DIN-35 rail.

WAGO 793-4665 WMB marking card for terminal blocks, vertical marking, snap-on type, 1-9 (10x), 4-4.2 mm width.

2-conductor terminal block with push-button, suitable for Ex i applications, and snap-in mounting foot.

WAGO 264-233 4-conductor terminal strip for Ex e II applications, featuring push-in spring termination and fixing flanges.

The WAGO 709-118 group marker carrier is a gray, height-adjustable component for organizing terminal blocks.

WAGO 750-923 configuration cable, USB A-type plug, 2.5m, -25 to 70°C, IP20, for Windows XP and 7.

WAGO 793-4520 WMB marking card, white, snap-on type, for horizontal marking, stretchable 4 - 4.2 mm width.

2-conductor terminal strip, Ex e II compliant, snap-in mounting, 4-pole, for 0.6-1.2mm plate thickness.

Stickers for operating instructions, compatible with 236 Series PCB terminal blocks from WAGO.

Space-saving 2-conductor terminal block with push-buttons, for grounding/earthing, DIN rail or surface mount.

Angled 3-pole PCB plug, Cod. A, for 16-22 AWG wires. Operating temperature: -35°C ~ 85°C.