Industrial Control Products

7-pole THT male header with 5mm pin spacing, straight 1.0x1.0mm solder pins, and clamping collar.

1-conductor female connector with CAGE CLAMP®, 2.5 mm², 5.08 mm pin spacing, and lateral locking levers.

3-pole yellow luminaire disconnect connector for safe electrical connections in lighting systems.

6-pole PCB terminal block with 7.5 mm pin spacing, CAGE CLAMP technology, and commoning option for reliable connections.

The WAGO 750-404/000-005 is a 2 up counter module designed for industrial automation applications.

WAGO 750-1505 is a 16-channel digital output module with 24 VDC, 0.5 A, and low-side switching, suitable for industrial automation.

Strain relief housing for secure connections, compatible with female and male connectors, 2-pole, 5 mm pin spacing.

The WAGO 283-316 is a 4 mm thick end and intermediate plate, gray in color, designed for use with 864.

WAGO 215-212 Banana Plug, 4mm, male, 20A, 42V, Cage Clamp termination. Ideal for test and measurement.

WAGO 793-5508 WMB marking card for horizontal marking, snap-on type, white. Marked 101-150 (2x), stretchable 5-5.2 mm.

WAGO 793-655/000-012 WMB marking card, snap-on, orange, with numbers 110-150 for 5mm terminal blocks.

8-position terminal block plug with 5.2mm pin spacing, push-in CAGE CLAMP, and anti-rotation protection.

2-conductor female connector with CAGE CLAMP®, 100% mismating protection, rated 16 A, 630 V. Ideal for secure and reliable connections.

WAGO 870-943 is a 1 mm thick, gray end and intermediate plate designed for use with terminal blocks.

Fail-safe 4/4 channel digital I/O module for high safety applications, with 24VDC, 2A per channel, and PROFIsafe.

WAGO 252-308 is a 2-conductor female connector with PUSH WIRE® technology, ideal for KNX systems and individual solder pins.

1m long, 14-pole connection cable with DIN 41651 connectors, rated 1A per conductor, IP20 protection.

2-channel digital input module for 24 VDC, 3 ms response time, with diagnostics and short-circuit proof voltage supply.

WAGO 793-4676 WMB marking card, suitable for vertical marking, snap-on type, and white in color.

A 16-channel digital input module compatible with EtherCAT, operating at 24 VDC, and featuring 8x M12 connections.