Industrial Control Products

WAGO 267-177 female connector with direct ground contact, 7 poles, 1.00 mm, and white color. Suitable for DIN rail mounting.

Angled 1-conductor female connector with CAGE CLAMP® technology, 2.5 mm² conductor size, and 5 mm pin spacing.

WAGO 862-1662 4-conductor chassis-mount terminal strip for L1-N, 32A, side-entry wiring, and push-in connections.

4-pole, 4 mm² terminal strip for chassis mounting, push-in CAGE CLAMP® technology, suitable for Ex e II applications.

Signals ground faults via digital output. Operates at 24 VDC. Ideal for monitoring ground resistance.

WAGO 261-429 2-conductor terminal strip for rail/chassis mounting with CAGE CLAMP technology.

10-pole, 2-conductor terminal strip with push-buttons and fixing flanges. Suitable for screw or similar mounting types.

4-conductor through terminal block, 6 mm², for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, Ex e II compliant.

The WAGO 231-772/001-000 is a THT male header designed for PCB connections, offering reliable and efficient connectivity.

WAGO 713-1424/116-000/997-406 Connector: Precision-engineered for reliable electrical connections.

Pre-assembled connecting cable with 5 poles, Cod. A coding, and 4m length, suitable for various industrial applications.

Pre-assembled 5-pole connecting cable with Cod. A coding, H05Z1Z1-F 5G 1.5 mm², 5 meters long, black.

Stackable PCB terminal block for reliable connections, 2.5 mm² conductor size, 10/10.16 mm pin spacing, PUSH WIRE® connection.

Angled 1-conductor female connector with CAGE CLAMP technology, 2.5 mm², 5.08 mm pin spacing, and orange color.

Triple-deck terminal block for EX e II applications. Features push-in CAGE CLAMP and marker carrier for DIN rail 35 x 15 and 35 x 7.5.

Managed industrial switch with 8 x 1000Base-T ports, 2 x 1000BASE-SX/LX slots, and Power over Ethernet support.

System cable for Siemens S7-300, 3m long, with 4 analog current outputs and 0.25 mm² conductor cross-section.

WAGO 2000-3258 triple-deck terminal block with shield/through/through configuration, suitable for DIN-rail 35 x 15 and 35 x 7.5.

The WAGO 793-526 is a WMB marking card designed for horizontal marking. It is a snap-on type and comes in white color, available in packs of 50.

The WAGO 750-658 CAN Gateway supports CAN 2.0A and 2.0B, allowing for the reading and writing of higher-protocol telegrams.