Industrial Control Products

Electronic circuit breaker; 1-channel; 24 VDC; 1 A

WSB marking card for marking purposes, not stretchable, horizontal marking, snap-on type, white.

Precise horizontal marking for various applications.

4-conductor through terminal block with push-button, 4 mm², with test port, suitable for Ex e II applications, side and center marking, for DIN-rail 35 x ...

Snap-on type, horizontal marking, not stretchable.

WAGO's 805 Series Terminal Strips provide internal commoning to meet requirements without routing the ground conductor over the board.

WAGO 262-252 terminal strip with snap-in mounting feet, ideal for electrical connections.

Triple-deck terminal block; 6-conductor through terminal block; N; with marker carrier; for Ex e II and Ex i applications; internal commoning; conductor entry with violet marking; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; Push-in CAGE CLAMP®; 2,50 mm²; blue.

The WAGO 250-512 is a 12-pole PCB terminal block with push-button actuation, designed for 1.5 mm² conductors and 5 mm pin spacing.

WAGO 209-420 WSB marking card; as card; MARKED; 91 / 92 (50 each); not stretchable; Horizontal marking; snap-on type; white

General mains applications, 3-pole, 20 A rated current, H05VV-F 3G2.5 cable type.

Through-panel terminal block; with end plate and retaining clip; 3-pole; for plate thickness 1-4 mm; 7 mm wide; gray.

Rectangular Connector, WINSTA MINI, 2 Contacts, Receptacle, Clamp, 1 Row.

2-conductor female connector with push-in CAGE CLAMP technology, suitable for PCB interconnects.

4-conductor terminal block with push-buttons and fixing flange; 1-pole; for screw or similar mounting types.

WAGO 257-448 is a 48-pole PCB terminal block with push-button and CAGE CLAMP.

Seperator plate with jumper bar recess; 2 mm thick; 110.3 mm wide; gray.

Sensor/Aktorleitung; M12A-Buchse; winklig; M8-Stecker; axial; 4-polig; Länge 0,3 m

4-conductor terminal strip with snap-in mounting feet, 9-pole, for plate thickness 0.6 - 1.2 mm.

The WAGO 254-557 is a 7-pole PCB terminal block with a conductor cross-sectional area of 2.5 mm². It features PUSH WIRE® termination for easy connection of solid and ferruled, fine-stranded conductors.