Industrial Control Products

1-conductor female connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 13-pole; clamping collar; 2,50 mm²; gray.

20-position terminal block with gray housing, suitable for screw or similar mounting types.

The WAGO 859-761 optocoupler module provides reliable electrical isolation and control with a 24 VDC input and 3-30 VDC output range, handling up to 3 A of continuous current.

Stackable PCB terminal block with CAGE CLAMP connection technology, suitable for conductors 0.08 mm² to 4 mm².

Basic relay with manual operation, suitable for various industrial applications.

The 254-844 is a single block terminal connector designed for PCB applications, featuring a 2.5 mm² current rating and a 5/5.08 mm pin spacing.

2 mm thick end and intermediate plate in gray.

The WAGO 787-832 EPSITRON PRO Power Supply is a single-phase, 24VDC, 10A power supply with PowerBoost.

WAGO 2636-3101/000-006 is a PCB terminal block with push-in CAGE CLAMP, suitable for AWG 18 - 4.

1-conductor N-disconnect terminal block; 16 mm²; Push-in CAGE CLAMP®; 16,00 mm²; blue.

Optocoupler module for safe isolation and signal processing.

WAGO 771-9395/067-202 WINSTA(R) MIDI pluggable installation connector with 5-pole, 20A rated current, and halogen-free materials for high-reliability electrical installations.

The WAGO 2204-1304 is a blue, neutral-through terminal block designed for Ex e II / Ex I applications. It features a single deck/level with button, side/lateral, and center marking slots. It includes a test port and supports three wires (one push-in and two push-in) with a nominal cross-section of 4mm², suitable for wire sizes ranging from 0.5mm² to 6mm² or #20AWG to #10AWG. The terminal block is rated for currents of 32A and 41A and utilizes Push-in CAGE CLAMP spring connections. It mounts on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 6.2mm.

Snap-on type connector label designed for 5mm wide terminal blocks. White color, 50 pieces per pack.

The WAGO 788-306 relay module is designed for reliable switching applications.

The WAGO 787-1635/000-070 is a high-quality electrical connector designed for reliable connectivity in various industrial applications.

DIN rail terminal blocks for secure and efficient electrical connections.

Capable ATEX rated green and yellow earth/grounding terminal block, designed for use in hazardous environments.

Space-saving ECB with one channel, reliably and safely trips in the event of an overload and short circuit.