Industrial Control Products

WAGO 891-8992/016-802 pre-assembled interconnecting cable with 2 poles, 1 mm² cross-section, and a durable design for reliable connections.

Insulated 4-way jumper for 2000 series.

Angled profile, rail mount, 4-conductor, 5.2 mm wide.

4-conductor disconnect/test terminal block with pivoting knife disconnect and test port.

2-conductor fuse holder for cylindrical fuses 10 x 38 mm; 13/32 x 11/2; 1-pole; with blown fuse indication; 600 VAC/VDC; for DIN-rail 35 x 15 and 35 x 7.5.

Multilevel installation terminal block with operating slots; 2.5 mm²; Carrier terminal block without knife; Black upper-deck, brown middle-deck, green-yellow lower-deck printing.

Double-deck terminal block suitable for Ex i applications with internal commoning and violet marking for conductor entry.

The WAGO 891-8993/005-103 is a plug-in connection terminal block designed for reliable electrical connections. It features mismating protection and a locking lever that can be retrofitted.

Protect your M12 sockets with the WAGO 756-8102 M12 protective cap.

WAGO 2002-1901 is a 2-conductor through terminal block designed for rail mount applications with an additional jumper position.

Strain relief housing for female and male connectors, 2 parts, pin spacing 3.5 mm, 9-pole, light gray.

WAGO's 231-216/031-000 female plug is a 16-pole interconnect solution with a mounting flange, suitable for 12 AWG max conductors.

WAGO 210-505 steel carrier rail, 35 x 7.5 mm, 1 mm thick, 2 m long, unslotted, galvanized, according to EN 60715.

Banana plug for socket 4 mm Ø, color mixed, 10 x each - orange, white, black, blue, yellow.

The DALI Multi-Master DC/DC Converter (753-620) is designed for industrial applications, offering reliable and efficient power conversion.

WAGO 756-5401/030-020 is a high-quality sensor/actuator cable designed for reliable connections.

Component terminal block; 2-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 1.5 mm²; CAGE CLAMP®; 1,50 mm²; gray.

Triple-deck LED terminal block with red LED indicators, designed for DIN-rail mounting, suitable for 24 VDC applications.

The WAGO 780-321 busbar carrier is a 1.5 mm thick blue component designed for DIN 35 rail, suitable for installation terminal blocks.

Angled THT female header with 18 poles and 5.08mm pin spacing.