Industrial Control Products

Siemens 3WL series frame circuit breakers and accessories

Complete assembly combination 22 mm metallic finish round selector switch with 2 switching positions L-R at 90DEG, V position lock, non-illuminated, with bracket, screw terminals, 1 normally open contact, black.

Front connector module for SIMATIC S7-300, digital IO, 2A, 16-pin connection wire, screw

SIMOTICS S synchronous motor S120 matching 1FT7108-5WF71-4FH1

SIMOTICS S synchronous motor S120 matching 1FT7108-5SF71-8CH1

Drawer-type circuit breaker, 3 poles, size 1 In=1250A, maximum 500V, AC 50/60Hz, Icu=66kA, with mechanical reclosing lock device when at 500V, equipped with trip signal switch, equipped with trip indicator, equipped with drawer-type frame, rated instantaneous current strength ICW 66kA/S, 3 poles, overcurrent trip unit ETU35WT, LSI setting range based on BG, equipped with display.

Drawer Circuit Breaker with Guide Frame 3-pole

Siemens 3WT series frame circuit breakers and accessories

SIMOTICS S synchronous motor S120 matching 1FT7086-5SH71-1CL1

Siemens 3WT series frame circuit breakers and accessories

Siemens 3VA series molded case circuit breakers and accessories

Drawer Circuit Breaker with Guide Frame 4-pole

Circuit Breaker 3VA1 IEC Frame 160 Interrupting Rating N Icu=25 kA @ 415 V 3-pole, System Protection TM210, FTFM, In = 25A Overload Protection Ir=25A Fixed Setting Short Circuit Protection Ii=12.8 x In Screw Flattop Connectors

Illuminated pushbutton, 22 mm, round, plastic, red, pushbutton, flat, momentary contact type, with holder, 1 NC, LED module with integrated LED 230 V AC, screw terminal

3VU13 Three-phase busbar

power contactor, AC-3, 16 A, 7.5 kW / 400 V, 4-pole, 110 V AC, 50/60 Hz, main contacts: 2 NO + 2 NC, spring-loaded terminal, size: S00

Activate the device and the TD300 trip unit, including the connecting cable 3VA-TD300, accessories for:

The circuit breaker VT400 standard switching capacity is N Icu = 35kA, 3-pole at 415/440 VAC. It provides system protection with a thermal-magnetic tripping device. The rated current IR is 400A for overload protection and II is 4000A for short-circuit protection. It is equipped with an undervoltage release for 220 VAC and comes with 1x HS rear terminals for withdrawal.

SIMATIC ET 200AL, IO-Link, DIQ 4+DQ 4x 24 V DC/0.5 A, 8x M8, Degree of protection IP67

SOLO Spur Gearbox FD109-K4-(112) Installation position M1 Oil level window Flange diameter 350 Surface protection C1 for normal contamination 7030 steingrau Test certificate Separation EN 10204-3.1 Special coating