Product Model
KTM-WN11171P
Key Features
- 1High accuracy and reliability with RGB LED light source.
- 2NPN switching output for precise signal control.
- 3IP67 rating for protection against harsh environments.
- 4Sensing distance up to 12.5 mm with ±3 mm tolerance.
- 5Compact housing design with teach-in button for easy setup.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Dimensions (W x H x D) | 12 mm x 31.5 mm x 21 mm | Sensing distance | ≤ 12.5 mm |
| Sensing distance tolerance | ± 3 mm | Housing design | Small |
| Light source | LED, RGB | Wave length | 470 nm, 525 nm, 625 nm |
| Light emission | Long side of housing | Light spot size | 1.6 mm x 9.5 mm |
| Light spot direction | Vertical | Receiving filters | None |
| Adjustment | Teach-in button | Teach-in mode | 2-point teach-in static/dynamic + proximity to mark#!#ET: Teach-in static |
| Supply voltage | 12 V DC ... 24 V DC | Ripple | ≤ 5 V |
| Current consumption | < 50 mA | Switching frequency | 15 kHz |
| Response time | 32 µs | Jitter | 15 µs |
| Switching output | NPN | Switching output (voltage) | NPN: HIGH = approx. U#!#/ LOW ≤ 2 V |
| Switching mode | Light/dark switching | Output current Imax. | 50 mA |
| Input, static teach-in (ET) | NPN: Teach: U < 2 V#!#NPN: Run: UV- 2 V or open | Retention time (ET) | 28 ms, non-volatile memory |
| Time delay | None | Connection type | Male connector M8, 4-pin |
| Protection class | III | Circuit protection | UVconnections, reverse polarity protected#!#Output Q short-circuit protected#!#Interference pulse suppression |
| Enclosure rating | IP67 | Weight | 20 g |
| Housing material | ABS | Optics material | PMMA |
| Indication | LED indicator green: power on#!#LED indicator, yellow: Status switching output Q | Connection type | Male connector M8, 4-pin |
| Pinouts_BN 1 | + (L+) | Pinouts_WH 2 | ET |
| Pinouts_BU 3 | - (M) | Pinouts_BK 4 | Q |
Specifications may be subject to change without notice