Product Model
PLC-RPT- 48UC/21AU
Key Features
- 1Simplify your system cabling with the V8 adapter for easy and secure connections.
- 2Conveniently mount the relay module on DIN rails for versatile installation options.
- 3Ensure reliable operation with reverse polarity protection and a polarity protection diode.
- 4Suitable for a wide range of applications with a nominal input voltage of 48V DC.
- 5Achieve quick switching with a typical response time of 5 ms and release time of 8 ms.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Product type | Relay Module | Product family | PLC-INTERFACE |
| Operating mode | 100% operating factor | Mechanical service life | approx. 3x 10 |
| Date of last data management | 08.07.2024 | Article revision | 04 |
| Insulation | Basic insulation | Maximum power dissipation for nominal condition | 0.48 W |
| Test voltage (Winding/contact) | 4 kV AC (50 Hz, 1 min., winding/contact) | Rated insulation voltage | 250 V AC |
| Rated surge voltage | 4 kV | Nominal input voltage U | 48 V AC/DC (50/60 Hz) |
| Input voltage range | 38.4 V AC/DC ... 60 V AC/DC (20 °C) | Nominal voltage (plugged-in electromechanical relay) | 24 V DC |
| Drive and function | monostable | Drive (polarity) | polarized |
| Typical input current at U | 10 mA (At U
9.2 mA (At U | Typical response time | 6 ms |
| Typical release time | 15 ms | Protective circuit | Bridge rectifier; Bridge rectifier |
| Operating voltage display | Yellow LED | Contact switching type | 1 changeover contact |
| Type of switch contact | Single contact | Contact material | AgSnO, hard gold-plated |
| Note | If the specified maximum values are exceeded, the gold plating is destroyed. The AgNi contact values are then valid for further operation; a reduction in length of service life is to be expected. | Maximum switching voltage | 30 V AC
36 V DC |
| Minimum switching voltage | 100 mV (at 10 mA) | Limiting continuous current | 50 mA |
| Maximum inrush current | 50 mA | Min. switching current | 1 mA (24 V) |
| Short-circuit current | 200 A (conditional short-circuit current) | Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
| Output fuse | 4 A gL/gG NEOZED | Switching capacity | 3 A (230 V (AC 15)) |
| Note | — | Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 5 V (at 100 mA) | Limiting continuous current | 6 A |
| Min. switching current | 10 mA (at 12 V) | Interrupting rating (ohmic load) max. | 140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC) |
| Connection method | Push-in connection | Stripping length | 10 mm |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² | Conductor cross section flexible | 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule) |
| Conductor cross section AWG | 26 ... 14 | Width | 6.2 mm |
| Height | 80 mm | Depth | 86 mm |
| Color | gray (RAL 7042) | Degree of protection (Relay base) | IP20 (Relay base) |
| Ambient temperature (operation) | -20 °C ... 60 °C | Ambient temperature (storage/transport) | -20 °C ... 60 °C |
| Certificate | CE-compliant | Certificate | UKCA-compliant |
| Certificate | TAE0000196 | Identification | ISA-S71.04. G3 Harsh Group
EN 60068-2-60 |
| Temperature | D | Humidity | A |
| Vibration | B/C | EMC | B |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board | Electromagnetic compatibility | Conformance with EMC directive |
| Low Voltage Directive | Conformance with Low Voltage Directive | Standards/regulations | IEC 60947-5-1 |
| Mounting type | DIN rail mounting | Assembly note | in rows with zero spacing |
| Mounting position | any |
Specifications may be subject to change without notice