Product Model
MKKDSN 1,5/ 4 H1L
Key Features
- 1Supports up to 13.5A nominal current for efficient power distribution.
- 2Ensures secure connections with screw connection method and tension sleeve.
- 3Rated for 400V (III/2) and 630V (II/2) for versatile use in different electrical systems.
- 4Constructed with Cu alloy contacts and PA insulating material for long-lasting performance.
- 5Compatible with wave soldering and suitable for various conductor cross sections (AWG 16-26).
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Product type | Printed circuit board terminal | Product family | MKKDSN 1,5 |
| Product line | COMBICON Terminals S | Number of positions | 4 |
| Pitch | 5 mm | Number of rows | 2 |
| Pin layout | Linear pinning | Solder pins per potential | 1 |
| Article revision | 00 | Nominal current I | 13.5 A |
| Nominal voltage U | 400 V | Rated voltage (III/3) | 250 V |
| Rated surge voltage (III/3) | 4 kV | Rated voltage (III/2) | 400 V |
| Rated surge voltage (III/2) | 4 kV | Rated voltage (II/2) | 630 V |
| Rated surge voltage (II/2) | 4 kV | Type | PC terminal block can be aligned |
| Nominal cross section | 1.5 mm² | Connection method | Screw connection with tension sleeve |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² | Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section AWG | 26 ... 16 | Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² | 2 conductors with same cross section, solid | 0.14 mm² ... 0.75 mm² |
| 2 conductors with same cross section, flexible | 0.14 mm² ... 0.75 mm² | 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.5 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1 mm² (1st level: 0.5 mm² ... 1 mm² / 2nd level: 0.5 mm²) | Stripping length | 6 mm |
| Drive form screw head | Slotted Phillips recess (H1L) | Tightening torque | 0.5 Nm ... 0.6 Nm |
| Mounting type | Wave soldering | Pin layout | Linear pinning |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 | Contact material | Cu alloy |
| Surface characteristics | Tin-plated | Metal surface terminal point (top layer) | Tin (5 - 7 µm Sn) |
| Metal surface terminal point (middle layer) | Nickel (2 - 3 µm Ni) | Metal surface soldering area (top layer) | Tin (5 - 7 µm Sn) |
| Metal surface soldering area (middle layer) | Nickel (2 - 3 µm Ni) | Color (Housing) | green (6021) |
| Insulating material | PA | Insulating material group | I |
| CTI according to IEC 60112 | 600 | Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 | Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C | Pitch | 5 mm |
| Width [w] | 22.5 mm | Height [h] | 22.6 mm |
| Length [l] | 18.3 mm | Installed height | 19.1 mm |
| Solder pin length [P] | 3.5 mm | Pin dimensions | 0.5 x 1 mm |
| Pin spacing | 10 mm | Hole diameter | 1.3 mm |
| Specification | IEC 60999-1:1999-11 | Result | Test passed |
| Specification | IEC 60999-1:1999-11 | Conductor cross section/conductor type/tractive force setpoint/actual value | 0.14 mm² / solid / > 10 N
0.14 mm² / flexible / > 10 N
1.5 mm² / solid / > 40 N
1.5 mm² / flexible / > 40 N |
| Specification | IEC 60947-7-4:2019-01 | Requirement temperature-rise test | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. |
| Specification | IEC 60947-7-4:2019-01 | Specification | IEC 60512-3-1:2002-02 |
| Insulation resistance, neighboring positions | > 5 MΩ | Specification | IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 |
| Insulating material group | I | Comparative tracking index (IEC 60112) | CTI 600 |
| Rated insulation voltage (III/3) | 250 V | Rated surge voltage (III/3) | 4 kV |
| minimum clearance value - non-homogenous field (III/3) | 3 mm | minimum creepage distance (III/3) | 3.2 mm |
| Note on connection cross section | With connected conductor 1.5 mm² (solid). | Rated insulation voltage (III/2) | 400 V |
| Rated surge voltage (III/2) | 4 kV | minimum clearance value - non-homogenous field (III/2) | 3 mm |
| minimum creepage distance (III/2) | 3 mm | Rated insulation voltage (II/2) | 630 V |
| Rated surge voltage (II/2) | 4 kV | minimum clearance value - non-homogenous field (II/2) | 3 mm |
| minimum creepage distance (II/2) | 3.2 mm | Specification | IEC 60068-2-6:2007-12 |
| Frequency | 10 - 150 - 10 Hz | Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) | Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Test duration per axis | 2.5 h | Test directions | X-, Y- and Z-axis |
| Specification | IEC 60695-2-10:2013-04 | Temperature | 850 °C |
| Time of exposure | 5 s | Specification | IEC 60947-7-4:2019-01 |
| Ambient temperature (operation) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) | Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Relative humidity (storage/transport) | 30 % ... 70 % | Ambient temperature (assembly) | -5 °C ... 100 °C |
| Type of packaging | packed in cardboard |
Specifications may be subject to change without notice