Product Model
IB IL INC-IN-PAC
Key Features
- 1Automatically detects open circuits for reliable operation.
- 2Compatible with symmetrical and asymmetrical incremental encoders with or without Z trace.
- 3Provides a 25-bit actual position value for precise motion control.
- 4Designed for high-resolution input from incremental encoders in complex machinery.
- 5Offers five homing functions for precise positioning tasks.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Width | 24.4 mm | Height | 140.5 mm |
| Depth | 71.5 mm | Note on application | Only for industrial use |
| CCCex note | Use in potentially explosive areas is not permitted in China. | Number of interfaces | 2 |
| Connection method | Inline data jumper | Transmission speed | 500 kbps |
| Transmission physics | Copper | ID code (dec.) | 127 |
| ID code (hex) | 7F | Length code (hex) | 02 |
| Length code (dec) | 02 | Process data channel | 32 bit |
| Input address area | 4 Byte | Output address area | 4 Byte |
| Register length | 4 Byte | Required parameter data | 1 Byte |
| Required configuration data | 5 Byte | Input name | Digital inputs |
| Description of the input | EN 61131-2 type 1 | Number of inputs | 3 |
| Connection method | Spring-cage connection | Connection technology | 3-conductor |
| Input voltage range "0" signal | -3 V DC ... 5 V DC | Input voltage range "1" signal | 15 V DC ... 30 V DC |
| Nominal input voltage U | 24 V DC | Nominal input current at U | typ. 2.7 mA |
| Number of inputs | 1 (Symmetrical or asymmetrical) | Input name | Incremental encoder input |
| Encoder signals | symmetrical encoders according to EIA-422 and asymmetrical encoders | Cable length | max. 30 m (shielded cable, to ensure conformance with EMC Directive) |
| Output name | Digital outputs | Connection method | Spring-cage connection |
| Connection technology | 2-conductor | Number of outputs | 1 (NPN, double assignment of input E3) |
| Product type | I/O component | Product family | Inline |
| Type | modular | Scope of delivery | including Inline connectors and marking fields |
| Operating mode | Process data mode with two words | Article revision | 11 |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) | Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Maximum power dissipation for nominal condition | 1.4 W | Number | 1 |
| Nominal output voltage | 5 V DC | Voltage range | 4.75 V DC ... 5.25 V DC |
| Current carrying capacity | max. 250 mA | Protective circuit | Short-circuit protection; Electrical and thermal |
| Number | 1 | Nominal output voltage | 24 V DC |
| Voltage range | 19.2 V DC ... 30 V DC | Current carrying capacity | max. 250 mA |
| Protective circuit | Short-circuit protection; Electronic and thermal | Number | max. 1 (A, /A, B, /B, Z, /Z) |
| Designation | Symmetrical incremental encoders | Encoder supply voltage | 5 V DC
24 V DC |
| Signal voltage level | Differential signal (signal – inverted signal) ±0.5 V, minimum; ±6 V, maximum | Common mode voltage range signal - ground | -10 V DC ... 13.2 V DC |
| Input frequency | max. 300 kHz | Number | max. 1 (A, B, (Z)) |
| Designation | Asymmetrical incremental encoder | Encoder supply voltage | 5 V DC
24 V DC |
| Signal voltage level | Low ≤ 2.5 V, high ≥ 3.5 V (up to 27 V, maximum) | Input frequency | max. 300 kHz |
| Supply voltage | 7.5 V DC (via voltage jumper) | Current draw | max. 70 mA |
| Supply voltage | 24 V DC (via voltage jumper) | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 1 A
typ. 340 mA | Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O) | 500 V AC, 50 Hz, 1 min |
| Test voltage: 24 V supply (I/O) / functional ground | 500 V AC, 50 Hz, 1 min | Test voltage: 7.5 V supply (bus logic)/functional ground | 500 V AC, 50 Hz, 500 min |
| Connection name | Inline connector | Connection method | Spring-cage connection |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² | Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 | Stripping length | 8 mm |
| Connection method | Spring-cage connection | Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² | Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm | Ambient temperature (operation) | -25 °C ... 55 °C |
| Degree of protection | IP20 | Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) | Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) | Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) | Mounting type | DIN rail mounting |
Specifications may be subject to change without notice