Product Model
IB IL 24 LPSDO 8 V2-PAC
Key Features
- 1Meets SIL 3 standards according to EN IEC 62061 and EN 61508.
- 2Compatible with INTERBUS, PROFINET, PROFIBUS, EtherCAT, DeviceNet, CANopen, EtherNet/IP, Sercos, and Modbus.
- 3Four safe digital outputs with two-channel assignment or eight safe digital outputs with single-channel assignment.
- 4IP20 protection and overload/short-circuit protection of outputs.
- 5Supports parameterized safety logic and diagnostics messages for error detection.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Width | 48.8 mm | Height | 119.8 mm |
| Depth | 71.5 mm | Note on dimensions | Housing dimensions |
| Note on application | Only for industrial use | No. of channels | 2 |
| Connection method | Inline data jumper | Transmission speed | 500 kbps / 2 Mbps (can be switched) |
| Connection to I/O modules | max. 5 (safe digital I/O modules) | Logic memory | 24 kByte |
| ID code (dec.) | 171 | ID code (hex) | AB |
| Length code (hex) | 18 | Length code (dec) | 24 |
| Process data channel | 48 Byte | Input address area | 48 Byte ((Operating mode: SafetyBridge 24 words)) |
| Output address area | 48 Byte ((Operating mode: SafetyBridge 24 words)) | Register length | 48 Byte |
| Required parameter data | 1 Byte ((Operating mode: SafetyBridge 24 words)) | Required configuration data | 5 Byte ((Operating mode: SafetyBridge 24 words)) |
| Output name | Digital outputs | Connection method | Spring-cage connection |
| Connection technology | 2-, 3-, 4-conductor | Number of outputs | 4 (for 2-channel assignment)
8 (for 1-channel assignment)
8 |
| Protective circuit | Overload protection, short-circuit protection of outputs | Output voltage | 24 V DC (U |
| Output current | max. 6 A (Total current of all outputs, -25 °C ... 50 °C)
max. 4 A (Total current of all outputs, >50 °C ... 55 °C) | Maximum output current per group | 3 A |
| Maximum output current per channel | 2 A | Nominal output voltage | 24 V DC |
| Nominal load, inductive | see safety data | Nominal load, lamp | see safety data |
| Nominal load, ohmic | see safety data | Behavior with inductive overload | Output can be destroyed |
| Product type | I/O component | Product family | Inline |
| Application | Functional safety
SafetyBridge technology | Type | modular |
| Diagnostics messages | Short-circuit or overload of the digital outputs Error message in diagnostics code (bus) and display by means of the LED on the motor | Article revision | 07 |
| Maximum power dissipation for nominal condition | 144 W | Transmission medium | Copper |
| Supply voltage | 7.5 V DC (see safety data) | Current draw | max. 230 mA (see safety data) |
| Supply voltage | 24 V DC (see safety data) | Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 6.03 A
typ. 30 mA (all outputs set including actuator current) | Supply voltage | 24 V (see safety data) |
| Supply voltage | 24 V DC (via voltage jumper) | Supply voltage range | 19.2 V DC ... 30 V DC |
| Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics) | 500 V AC, 50 Hz, 1 min | Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics) | 500 V AC, 50 Hz, 1 min |
| Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O) | 500 V AC, 50 Hz, 1 min | Test voltage: 24 V supply (I/O) / functional ground | 500 V AC, 50 Hz, 1 min |
| Connection name | Inline connector | pluggable | yes |
| Connection method | Spring-cage connection | Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² | Conductor cross section AWG | 24 ... 16 |
| Connection method | Spring-cage connection | Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² | Conductor cross section AWG | 24 ... 16 |
| Ambient temperature (operation) | -25 °C ... 55 °C | Degree of protection | IP20 |
| Air pressure (operation) | 80 kPa ... 108 kPa (up to 2000 m above sea level) | Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C | Permissible humidity (operation) | 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) |
| Permissible humidity (storage/transport) | 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) | Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | DIN rail mounting |
Specifications may be subject to change without notice