Product Model
IB IL 24/48 DOR 2/W-XC-PAC
Key Features
- 1Reliable Relay Terminal: Designed for extreme conditions with 2 floating contacts.
- 2Versatile Voltage Range: Compatible with 24 V AC / 48 V DC, 2 A output.
- 3High-Speed Transmission: Supports transmission speed in the local bus at 500 kbps.
- 4Durable Protection: Features IP20 degree of protection for reliable operation.
- 5Easy Installation: Includes inline connector and labeling field for straightforward setup.
Technical Specifications
Detailed engineering parameters based on manufacturer documentation
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Width | 12.2 mm | Height | 119.8 mm |
| Depth | 71.5 mm | Note on dimensions | Housing dimensions |
| Color | green | Number of interfaces | 2 |
| Connection method | Inline data jumper | Transmission speed | 500 kbps |
| ID code (dec.) | 189 | ID code (hex) | BD |
| Length code (hex) | C2 | Length code (dec) | 194 |
| Process data channel | 2 bit | Input address area | 0 bit |
| Output address area | 2 bit | Register length | 2 bit |
| Required parameter data | 3 Byte | Required configuration data | 4 Byte |
| Output name | Relay output | Output description | Relay changeover contact |
| Connection method | Spring-cage connection | Number of outputs | 2 (floating contacts) |
| Maximum output current per channel | 2 A | Maximum output current per module | 4 A |
| Nominal output voltage | 24 V AC
48 V DC | Output voltage range | 5 V AC ... 30 V AC
5 V DC ... 60 V DC |
| Contact switching type | 2 floating changeover contacts | Switching voltage | min. 10 mV (DC)
max. 30 V AC (PELV (EN 61131))
max. 60 V DC (PELV (EN 61131)) |
| Switching current | min. 10 µA
2 A (30 V DC)
1 A (60 V DC) | Switching capacity | 60 W
62.5 VA (ohmic) |
| Limiting continuous current | 2 A (at maximum ambient temperature) | Mechanical service life | 2x 10 |
| Product type | I/O component | Product family | Inline |
| Type | modular | Scope of delivery | including Inline connector and labeling field |
| No. of channels | 2 | Operating mode | Process data mode with 2 bits |
| Special properties | for switching ohmic loads
Extreme conditions version | Article revision | 02 |
| Supply voltage | 7.5 V DC (via voltage jumper) | Current draw | max. 30 mA |
| Test voltage: Relay contact / Bus logics | 1.5 kV, 50 Hz, 1 min | Test voltage: Contact/contact | 1 kV, 50 Hz, 1 min |
| Test voltage: Contact / PE | 1 kV, 50 Hz, 1 min | Connection name | Inline connector |
| Connection method | Spring-cage connection | Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² | Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm | Connection method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² | Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 | Stripping length | 8 mm |
| Ambient temperature (operation) | -25 °C ... 55 °C (Standard)
-40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) | Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) | Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C | Permissible humidity (operation) | 10 % ... 95 % (according to DIN EN 61131-2) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (according to DIN EN 61131-2) | Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | DIN rail mounting |
Specifications may be subject to change without notice